Magua 

 

-.178" CPM3V steel heat treated by Peters

-10.5" OAL

-5.75" blade

-9.5 - 10 ounces 

-Flat grind

-Etched & tumbled finish

-Knife 1 has OD green G10 scales with black G10 bolsters, coyote G10 liners/dividers & black canvas micarta pins

-Knife 2 has earth/coyote/tan G10 scales with orange G10 liners & natural canvas micarta pins

-15 degree edge (30 inclusive) - I grind the final edge by hand, so the angle is approximate

Contact:  shawn@hatcherknives.com

Click any photo below to see a larger version

 

2012-10-10-at-19-00-01-X3.jpg
2012-10-10-at-18-59-15-X3.jpg
2012-10-10-at-18-56-09-X3.jpg
2012-10-10-at-18-57-12-X3.jpg
2012-10-10-at-19-01-24-X2.jpg
2012-10-10-at-18-53-32-X2.jpg
2012-10-10-at-19-08-33-X3.jpg
2012-10-10-at-19-04-56-X2.jpg
2012-10-10-at-19-12-57-X3.jpg
2012-10-10-at-19-14-54-X3.jpg
2012-10-10-at-19-14-43-X3.jpg
2012-10-19-at-18-01-11-X3.jpg
2012-10-19-at-18-00-23-X2.jpg
2012-10-19-at-17-57-49-X2.jpg
2012-10-19-at-17-57-34-X2.jpg
Google Analytics Alternative